Resetting The Access Point; Figure 55: Resetting The Access Point - SMC Networks EliteConnect SMCE21011 User Manual

R A
ESETTING THE CCESS
maximum length for file names on the FTP/TFTP server is 255
characters. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
IP Address — IP address or host name of FTP or TFTP server.
◆
Username — The user ID used for login on an FTP server.
◆
Password — The password used for login on an FTP server.
◆
◆ Start Import/Export — Initiates the selected backup or restore.
Restore Factory Setting — Click the Restore button to reset the
◆
configuration settings for the access point to the factory defaults and
reboot the system. Note that all user configured information will be
lost. You will have to re-enter the default user name (admin) to re-gain
management access to this device.
Running Config To Startup Config — Clicking "Save" to save the
◆
running configuration to the startup file.
P
OINT
The Reset page allows you to reset the access point and save the running
configuration before the reboot.

Figure 55: Resetting the Access Point

The following items are displayed on this page:
Save Runtime config before Reboot — Checking this option saves
◆
the current running configuration to the startup file.
Reboot — Click the "Reboot" button to reset the configuration settings
◆
for the access point and reboot the system. Note that all unsaved user
configured information will be lost. You will have to re-enter the default
user name (admin) to re-gain management access to this device.
If you have upgraded system software, then you must reboot the
N :
OTE
access point to implement the new operation code. New software that is
incompatible with the current configuration automatically restores the
access point to default values when first activated after a reboot.
– 107 –
| Maintenance Settings
C 9
HAPTER

Resetting the Access Point