Bridge Stp Br-Conf Interface - SMC Networks EliteConnect SMCE21011 User Manual

S
D
32768
C
Global Configuration
C
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority becomes the STP root
device. However, if all devices have the same priority, the device with the
lowest MAC address will then become the root device.
E
No idea.
bridge stp br-conf
interface
S
D
32768
C
Global Configuration
C
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority becomes the STP root
device. However, if all devices have the same priority, the device with the
lowest MAC address will then become the root device.
E
YNTAX
bridge stp br-conf priority<priority>
no bridge stp br-conf priority
priority - Priority of the bridge. (Range: 0 - 65535)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
AP(config)#bridge stp br-conf priority 40000
AP(config)#
YNTAX
bridge stp br-conf interface {ethernet | wireless <priority>}
no bridge stp br-conf interface
priority - Priority of the bridge. (Range: 0 - 65535)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
AP(config)#bridge stp br-conf interface ethernet 40000
AP(config)#
– 189 –
| Spanning Tree Commands
C 23
HAPTER