DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
show system services dhcp statistics
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 30: show system services dhcp statistics Output Fields
Field Name
Field Description
Default lease time
Lease time assigned to clients that do not request a specific lease time.
Minimum time a client can retain an IP address lease on the server.
Minimum lease time
Maximum time a client can retain an IP address lease on the server.
Maximum lease time
Total number of packets dropped and number of packets dropped because of:
Packets dropped
454
show system services dhcp statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) server statistics.
This command has no options.
view and system
clear system services dhcp statistics on page 361
show system services dhcp statistics on page 455
Table 30 on page 454
describes the output fields for the
statistics
command. Output fields are listed in the approximate order in which they
appear.
Invalid hardware address
Invalid opcode
Invalid server address
No available address
No interface match
No routing instance match
No valid local addresses
Packet too short
Read error
Send error
show system services dhcp
Copyright © 2017, Juniper Networks, Inc.