Juniper EX3400 Features Manual page 174

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
Required Privilege
Level
154
The format of the Agent Circuit ID information for Fast Ethernet or Gigabit Ethernet
interfaces that do not use virtual LANs (VLANs), stacked VLANs (S-VLANs), or bridge
domains is as follows:
(fe | ge)-fpc/pic/port.subunit
NOTE: For remote systems, the subunit is required and is used to differentiate
an interface for remote systems.
The format of the Agent Circuit ID information for Fast Ethernet or Gigabit Ethernet
interfaces that use VLANs is as follows:
(fe | ge)-fpc/pic/port:vlan-id
The format of the Agent Circuit ID information for Fast Ethernet or Gigabit Ethernet
interfaces that use S-VLANs is as follows:
(fe | ge)-fpc/pic/port:svlan-id-vlan-id
In the case of an IRB interface, the format displays the Layer 2 interface instead of the
IRB interface along with the bridge domain name. For IRB interfaces (or other pseudo
devices) the default format is as follows:
IRB interfaces that use bridge domains but do not use VLANs or S-VLANs:
(fe | ge)-fpc/pic/port.subunit:bridge-domain-name
IRB interfaces that use VLANs:
(fe | ge)-fpc/pic/port.subunit:vlan-name
To include the IRB interface name with the Layer 2 interface name, configure the
include-irb-and-l2 statement. The format is as follows:
IRB interfaces that use bridge domains but do not use VLANs or S-VLANs:
(fe | ge)-fpc/pic/port:bridge-domain-name+irb.subunit
IRB interfaces that use VLANs:
(fe | ge)-fpc/pic/port:vlan-name+irb.subunit
To include only the IRB interface name without the Layer 2 interface and bridge domain
or VLAN, configure the
no-vlan-interface-name
irb.subunit
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
statement. The format is as follows:
Copyright © 2017, Juniper Networks, Inc.