Minimum-Wait-Time - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

minimum-wait-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
236
minimum-wait-time seconds;
[edit forwarding-options helpers
[edit forwarding-options helpers
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for QFX Series switches.
Set the minimum allowed number of seconds that the BOOTP client has waited before
packets are forwarded, based on the secs field in the BOOTP request message. If the
value of
minimum-wait-time
message, the packet is not forwarded to the BOOTP servers and relay agents that are
configured at the hierarchy level of this statement. You can use the
statement to determine which servers the device should forward packets to based on
how long the BOOTP client has been waiting to receive a BOOTP reply from a server.
The BOOTP client sets the secs field in the BOOTP request to reflect the number of
seconds elapsed since the client began address acquisition or a renewal process.
The default value for the minimum wait time is zero (0) seconds. If the minimum wait
time is 0 and the secs field in the BOOTP request message is 0, the device forwards the
packet.
seconds—Minimum wait time the BOOTP client has waited before packets are forwarded.
Range: 0 to 30,000
Default: 0
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Routers, Switches, and Interfaces as DHCP and BOOTP Relay Agents
bootp],
bootp interface (interface-name | interface-group)]
is less than the value of the secs field in the BOOTP request
minimum-wait-time
Copyright © 2017, Juniper Networks, Inc.