Use-Vlan-Id - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

use-vlan-id

Syntax
For Platforms with
Enhanced Layer 2
Software (ELS)
For MX Series
Platforms
Release Information
Description
Required Privilege
Level
314
use-vlan-id;
[edit forwarding-options helpers bootp dhcp-option82-circuit-id]
[edit forwarding-options helpers bootp interface interface-name dhcp-option82-circuit-id]
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security option-82
circuit-id]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Hierarchy level
[edit vlans vlan-name forwarding-options dhcp-security]
Junos OS Release 13.2X50-D10. (See Getting Started with Enhanced Layer 2 Software for
information about ELS.)
Hierarchy level
[edit bridge-domains bridge-domain-name forwarding-options dhcp-security]
introduced in Junos OS Release 14.1 for the MX Series.
NOTE: The EX Series switches that support the
the EX4300, EX4600, and EX9200 switches.
Use the VLAN ID rather than the VLAN name (the default) in the circuit ID or remote ID
value in the DHCP option 82 information.
NOTE: The
use-vlan-id
use-interface-description
The statement only applies to interfaces in a bridge domain. The format of
use-vlan-id
the Agent Circuit ID or Agent Remote ID information for Fast Ethernet or Gigabit Ethernet
interfaces is as follows:
(fe | ge)-fpc/pic/port.subunit:svlan_id-vlan_id
NOTE: The subunit is required and used to differentiate the interface for
remote systems, and svlan_id-vlan_id represents the VLANs associated with
the bridge domain.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
use-vlan-id
statement is mutually exclusive with the
and
no-vlan-interface-name
Copyright © 2017, Juniper Networks, Inc.
introduced in
statement are
statements.