Next-Hop (Dynamic Access-Internal Routes) - Juniper EX3400 Features Manual

next-hop (Dynamic Access-Internal Routes)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
next-hop next-hop;
[edit dynamic-profiles profile-name routing-instances $junos-routing-instance routing-options
access route prefix],
[edit dynamic-profiles profile-name routing-instances $junos-routing-instance routing-options
rib routing-table-name access route prefix],
[edit dynamic-profiles profile-name routing-options
Statement introduced in Junos OS Release 9.5.
Support at the
[edit dynamic-profiles profile-name routing-instances
$junos-routing-instance routing-options access route prefix]
profile-name routing-instances $junos-routing-instance routing-options rib
routing-table-name access route prefix]
10.1.
Dynamically configure the next-hop address for an access route. Access routes are
typically unnumbered interfaces.
next-hop—Either the specific next-hop address you want to assign to the access route
or one of the following next-hop address predefined variables.
For IPv4 access routes, use the variable,
variable is dynamically replaced with the value in Framed-Route RADIUS attribute
[22].
For IPv6 access routes, use the variable,
is dynamically replaced with the value in Framed-IPv6-Route RADIUS attribute [99].
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Dynamic Access Routes for Subscriber Management
Chapter 12: Configuration Statements (DHCP and DHCP Relay)
access route prefix]
and
hierarchy levels introduced in Junos OS Release
$junos-framed-route-nexthop
$junos-framed-route-ipv6-nexthop
[edit dynamic-profiles
. The route prefix
. The variable
239