Disconnect - Juniper EX3400 Features Manual

Related
Documentation
Configuring Reconfiguration of the Client on Receipt of RADIUS-Initiated Disconnect
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Chapter 9: Forcing Dynamic Reconfiguration of Clients from a DHCP Local Server
Configuring Dynamic Client Reconfiguration of Extended Local Server Clients on page 114
clear-on-abort on page 158
You can configure the local server to reconfigure the client when the client receives a
RADIUS-initiated disconnect. By default, the client is deleted when a RADIUS-initiated
disconnect is received.
(Optional) To configure the DHCP local server to reconfigure the client instead of deleting
the client when a RADIUS-initiated disconnect is received, for all clients:
Specify the RADIUS-initiated disconnect trigger.
For DHCPv4:
[edit system services dhcp-local-server reconfigure trigger]
user@host# set radius-disconnect
For DHCPv6:
[edit system services dhcp-local-server dhcpv6 reconfigure trigger]
user@host# set radius-disconnect
To override the global configuration for a particular group of clients, include the statement
at the [edit system services dhcp-local-server group group-name reconfigure trigger]
hierarchy level or the
[edit system services dhcpv6 dhcp-local-server group group-name
hierarchy level.
reconfigure trigger]
Configuring Dynamic Client Reconfiguration of Extended Local Server Clients on page 114
radius-disconnect on page 266
trigger on page 307
119