Table 25: Show Route Extensive Output Fields - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
show route extensive
List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 25: show route extensive Output Fields

Field Name Field Description
Name of the routing table (for example, inet.0).
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
414
Syntax on page 414
Syntax (EX Series Switches) on page 414
show route extensive
<destination-prefix>
<logical-system (all | logical-system-name)>
show route extensive
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display extensive information about the active entries in the routing tables.
none—Display all active entries in the routing table.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route extensive on page 421
show route extensive (Access Route) on page 428
show route extensive (BGP PIC Edge) on page 428
show route extensive (FRR and LFA) on page 429
show route extensive (IS-IS) on page 430
show route extensive (Route Reflector) on page 430
show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint
LSPs) on page 430
show route label detail (Multipoint LDP with Multicast-Only Fast Reroute) on page 431
Table 25 on page 414 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
command.
show route extensive
Copyright © 2017, Juniper Networks, Inc.