Requesting Dhcp Local Server To Initiate Reconfiguration Of Client Bindings - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
Release History Table

Requesting DHCP Local Server to Initiate Reconfiguration of Client Bindings

116
See "Configuring Deletion of the Client When Dynamic Reconfiguration Fails" on
page 118.
(Optional) Configure the behavior in response to a RADIUS-initiated disconnect.
7.
See "Configuring Reconfiguration of the Client on Receipt of RADIUS-Initiated
Disconnect" on page 119.
(Optional) Configure a token for rudimentary server authentication.
8.
See "Configuring a Token for DHCP Local Server Authentication" on page
(Optional) Initiate reconfiguration of some or all client bindings.
9.
See "Requesting DHCP Local Server to Initiate Reconfiguration of Client Bindings" on
page 116.
(Optional) Prevent DHCPv6 clients from binding if they do not support reconfigure
10.
messages.
See "Preventing Binding of Clients That Do Not Support Reconfigure Messages" on
page 42.
Release Description
14.1 Starting in Junos OS Release 14.1, you can modify the behavior of the process
in which the DHCP local server initiates reconfiguration of its clients by including
the appropriate configuration statements.
You can request that the DHCP local server initiate reconfiguration of all of clients or only
specified clients.
To request reconfiguration of all clients:
Specify the all option.
For DHCPv4:
user@host> request dhcp server reconfigure all
For DHCPv6:
user@host> request dhcpv6 server reconfigure all
You can use any of the following methods to request reconfiguration of specific clients:
Specify the IP address of the DHCP client.
31.
Copyright © 2017, Juniper Networks, Inc.