Example: Minimum Extended Dhcp Local Server Configuration - Juniper EX3400 Features Manual

Related
Documentation

Example: Minimum Extended DHCP Local Server Configuration

Copyright © 2017, Juniper Networks, Inc.
NOTE: The extended DHCP local server and the address-assignment pools
used by the server must be configured in the same logical system and routing
instance.
Address-Assignment Pools Overview on page 121
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 122
Dynamic Profile Attachment to DHCP Subscriber Interfaces Overview
Using External AAA Authentication Services with DHCP on page 101
Assign a Specific IP Address to a Client Using DHCP Option 50 and DHCPv6 IA_NA
Option on page 128
Graceful Routing Engine Switchover for DHCP
High Availability Using Unified ISSU in the PPP Access Network
Tracing Extended DHCP Operations
Verifying and Managing DHCP Local Server Configuration on page 37
Example: Minimum Extended DHCP Local Server Configuration on page 27
Example: Extended DHCP Local Server Configuration with Optional Pool Matching on
page 123
Example: Configuring a DHCP Firewall Filter to Protect the Routing Engine
This example shows the minimum configuration you need to use for the extended DHCP
local server on the router or switch:
[edit system services]
dhcp-local-server {
group group_one {
interface fe-0/0/2.0;
}
}
NOTE: The interface type in this topic is just an example. The
type is not supported by EX Series switches.
This example creates the server group named
local server is enabled on interface
uses the default pool match configuration of
, and specifies that the DHCP
group_one
within the group. The DHCP local server
fe-0/0/2.0
ip-address-first.
Chapter 2: DHCP Local Server
interface
fe-
27