Show Dhcp Relay Statistics - Juniper EX3400 Features Manual

show dhcp relay statistics

Syntax
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show dhcp relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Syntax for EX Series switches:
show dhcp relay statistics
<routing-instance routing-instance-name>
Command introduced in Junos OS Release 8.3.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
bulk-leasequery-connections
Display Dynamic Host Configuration Protocol (DHCP) relay statistics.
bulk-leasequery-connections—(Optional) Display information about bulk leasequery
operations.
logical-system logical-system-name—(On routers only) (Optional) Perform this operation
on the specified logical system. If you do not specify a logical system name, statistics
are displayed for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are displayed for the default routing instance.
view
clear dhcp relay statistics on page 345
show dhcp relay statistics on page 387
show dhcp relay statistics bulk-leasequery-connections on page 388
Table 19 on page 386 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 14: Operational Commands (DHCP and DHCP Relay)
option introduced in Junos OS Release 16.1.
show dhcp relay statistics
command.
385