show dhcpv6 relay statistics
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show dhcpv6 relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Command introduced in Junos OS Release 11.4.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
bulk-leasequery-connections
Display Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay statistics.
bulk-leasequery-connections—(Optional) Display bulk leasequery statistics.
logical-system logical-system-name—(Optional) Perform this operation on the specified
logical system. If you do not specify a logical system name, statistics are displayed
for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are displayed for the default routing instance.
view
clear dhcpv6 relay statistics on page 356
show dhcpv6 relay statistics on page 409
show dhcpv6 relay statistics bulk-leasequery-connections on page 410
Table 23 on page 408
lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 14: Operational Commands (DHCP and DHCP Relay)
option introduced in Junos OS Release 16.1.
show dhcpv6 relay statistics
command.
407