Rapid-Commit (Dhcpv6 Local Server) - Juniper EX3400 Features Manual

rapid-commit (DHCPv6 Local Server)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Configuring Reconfiguration of the Client on Receipt of RADIUS-Initiated Disconnect
on page 119
rapid-commit;
[edit system services dhcp-local-server
[edit system services dhcp-local-server dhcpv6
[edit system services dhcp-local-server dhcpv6
overrides],
[edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server dhcpv6
[edit logical-systems logical-system-name system services
[edit routing-instances routing-instance-name system services
...]
Statement introduced in Junos OS Release 12.1.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Configure DHCPv6 local server to recognize the Rapid Commit option (DHCPv6 option
14) in DHCPv6 solicit messages sent from the DHCPv6 client. When rapid commit is
enabled for both DHCPv6 local server and the DHCPv6 client, a two-message handshake
is used instead of the standard four-message handshake. You can enable rapid commit
support on DHCPv6 local server globally, for a named group, or for a specific interface.
Rapid commit support is not enabled.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Enabling DHCPv6 Rapid Commit Support on page 41
Overriding Default DHCP Local Server Configuration Settings on page 28
Chapter 12: Configuration Statements (DHCP and DHCP Relay)
dhcpv6 overrides],
group group-name overrides],
group group-name interface interface-name
...],
dhcp-local-server dhcpv6
dhcp-local-server dhcpv6
...],
267