Table 28: Show System Services Dhcp Global Output Fields - Juniper EX3400 Features Manual

show system services dhcp global
Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show system services dhcp global
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) global configuration options. Global options apply to all scopes and
clients served by the DHCP server. Global options are overridden if specified otherwise
in scope or client options. Scope options apply to specific subnets or ranges of addresses.
Client options apply to specific clients.
This command has no options.
view and system
show system services dhcp global on page 450
Table 28 on page 449 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 28: show system services dhcp global Output Fields

Field Name
BOOTP lease length
Default lease time
Minimum lease time
Maximum lease time
DHCP options
Chapter 14: Operational Commands (DHCP and DHCP Relay)
Field Description
Length of lease time assigned to BOOTP clients.
Lease time assigned to clients that do not request a specific lease
time.
Minimum time a client retains an IP address lease on the server.
Maximum time a client can retain an IP address lease on the server.
User-defined options created for the DHCP server. If no options
have been defined, this field is blank.
show system services dhcp global
449