Juniper EX3400 Features Manual page 233

Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
When you configure both the
the format is as follows:
(fe | ge)-fpc/pic/port.subunit:svlan-id-vlan-id+irb.subunit
NOTE: The svlan-id-vlan-id represents the VLANs associated with the bridge
domain.
When you configure both the
the format is as follows:
(fe | ge)-fpc/pic/port.subunit+irb.subunit
When you configure both the
the format displays the description for the Layer 2 interface:
l2_descr:vlan-name+irb.subunit
If you configure both the
include-irb-and-l2
and no description for the Layer 2 interface is found, the format displays the Layer 2
logical interface name:
(fe | ge)-fpc/pic/port.subunit:vlan-name+irb.subunit
When you configure the include-irb-and-l2
and
use-interface-description
l2_descr+irb.subunit
If you configure the
include-irb-and-l2
and use-interface-description
interface, the format displays as follows:
(fe | ge)-fpc/pic/port.subunit+irb.subunit
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Including a Textual Description in DHCP Options on page 65
Using DHCP Relay Agent Option 82 Information on page 60
Configuring DHCPv6 Relay Agent Options
Chapter 12: Configuration Statements (DHCP and DHCP Relay)
statement and the
include-irb-and-l2
include-irb-and-l2 and no-vlan-interface-name
and
include-irb-and-l2 use-interface-description
and
use-interface-description
statement with both the
statements, the format displays as follows:
statement with both the
statements, and no description is found for the Layer 2
statement,
use-vlan-id
statements,
statements,
statements,
no-vlan-interface-name
no-vlan-interface-name
213