Juniper EX3400 Features Manual page 360

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
clear dhcp relay binding
clear dhcp relay binding all
clear dhcp relay binding dual-stack all
340
view
Clearing DHCP Bindings for Subscriber Access
show dhcp relay binding on page 372
clear dhcp relay binding on page 340
clear dhcp relay binding all on page 340
clear dhcp relay binding dual-stack all on page 340
clear dhcp relay binding interface on page 341
clear dhcp relay binding <interfaces-vlan> on page 341
clear dhcp relay binding <interfaces-wildcard> on page 341
See show dhcp relay binding
The following sample output displays the address bindings in the DHCP client table
before and after the
clear dhcp relay binding
user@host> show dhcp relay binding
IP address Hardware address
198.51.100.32 00:00:5e:00:53:01
192.168.14.8 00:00:5e:00:53:02
user@host> clear dhcp relay binding 198.51.100.32
user@host> show dhcp relay binding
IP address Hardware address
192.168.14.8 00:00:5e:00:53:02
The following command clears all DHCP relay agent bindings:
user@host> clear dhcp relay binding all
The following command clears all DHCP relay agent bindings for all DHCPv4 clients and
the associated DHCPv6 bindings in the single-session DHCP dual stack. DHCPv6 clients
created in a DHCPv6-only stack are not affected.
user@host> clear dhcp relay binding dual-stack all
for an explanation of output fields.
command is issued.
Type Lease expires at
active 2007-02-08 16:41:17 EST
active 2007-02-10 10:01:06 EST
Type Lease expires at
active 2007-02-10 10:01:06 EST
Copyright © 2017, Juniper Networks, Inc.