Table 27: Show System Services Dhcp Conflict Output Fields - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
show system services dhcp conflict
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
show system services dhcp conflict
448
show system services dhcp conflict
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers only and EX Series switches) Display Dynamic Host Configuration
Protocol (DHCP) client-detected conflicts for IP addresses. When a conflict is detected,
the DHCP server removes the address from the address pool.
This command has no options.
view and system
clear system services dhcp conflict on page 360
show system services dhcp conflict on page 448
Table 27 on page 448 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 27: show system services dhcp conflict Output Fields

Field Name
Detection time
Detection method
Address
user@host> show system services dhcp conflict
Detection time
2004-08-03 19:04:00 PDT
2004-08-04 04:23:12 PDT
2004-08-05 21:06:44 PDT
Field Description
Date and time the client detected the conflict.
How the conflict was detected.
IP address where the conflict occurs. The addresses in the conflicts
list remain excluded from the pool until you use a
command to manually clear the list.
services dhcp conflict
Detection method Address
ARP 10.0.0.1
Ping 10.0.0.2
Client 10.0.0.3
show system services dhcp conflict
clear system
Copyright © 2017, Juniper Networks, Inc.