Juniper EX3400 Features Manual page 135

Dhcp and other system services feature guide
Hide thumbs Also See for EX3400:
Table of Contents

Advertisement

Copyright © 2017, Juniper Networks, Inc.
Chapter 9: Forcing Dynamic Reconfiguration of Clients from a DHCP Local Server
For DHCPv6:
[edit system services dhcp-local-server dhcpv6 group group-name]
user@host# set
reconfigure
(Optional) Configure an authentication token. The DHCP local server then includes
3.
this token inside the authentication option when it sends forcerenew or reconfigure
messages. If the service provider has previously configured the DHCP client with this
token, then the client can compare that token against the newly received token, and
reject the message if the tokens do not match. This functionality corresponds to RFC
3118, Authentication for DHCP Messages, section 4.
For all clients:
a.
For DHCPv4:
[edit system services dhcp-local-server reconfigure]
user@host# set
token
For DHCPv6:
[edit system services dhcp-local-server dhcpv6 reconfigure]
user@host# set
token
For only the DHCP clients serviced by a group of interfaces:
b.
For DHCPv4:
[edit system services dhcp-local-server group-name reconfigure]
user@host# set
token
For DHCPv6:
[edit system services dhcp-local-server dhcpv6 group group-name reconfigure]
user@host# set
token
For the DHCPv6 server only, you can include the
4.
accepts solicit messages from clients that do not support server-initiated
reconfiguration. Including this statement causes the server to discard solicit messages
from nonsupporting clients; consequently the server does not bind these clients.
For all DHCPv6 clients:
[edit system services dhcp-local-server dhcpv6 reconfigure]
user@host# set
strict
For only the DHCPv6 clients serviced by a group of interfaces:
[edit system services dhcp-local-server dhcpv6 group group-name reconfigure]
user@host# set
strict
(Optional) Configure how the server attempts reconfiguration.
5.
See
"Configuring Dynamic Reconfiguration Attempts for DHCP Clients" on page
(Optional) Configure the response to a failed reconfiguration.
6.
token-value
token-value
token-value
token-value
statement. By default, the server
strict
117.
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex4300Ex2300

Table of Contents