DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
interface (DHCP Relay Agent)
Syntax
Hierarchy Level
Release Information
Description
216
interface dhcp-interface-name {
access-profile profile-name;
exclude;
overrides
{
allow-no-end-option
allow-snooped-clients;
always-write-giaddr;
always-write-option-82;
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
client-discover-match <option60-and-option82 | incoming-interface>;
client-negotiation-match incoming-interface;
disable-relay;
dual-stack dual-stack-group-name;
interface-client-limit
number;
layer2-unicast-replies;
no-allow-snooped-clients;
proxy-mode;
relay-source
replace-ip-source-with;
send-release-on-delete;
trust-option-82;
}
service-profile
dynamic-profile-name;
trace;
upto upto-interface-name;
}
[edit forwarding-options dhcp-relay dhcpv6
[edit forwarding-options dhcp-relay
[edit logical-systems logical-system-name forwarding-options
[edit logical-systems logical-system-name routing-instances routing-instance-name
forwarding-options
dhcp-relay
[edit routing-instances routing-instance-name forwarding-options dhcp-relay ...]
Statement introduced in Junos OS Release 8.3.
Options
and
upto
exclude
Support at the
[edit ... dhcpv6]
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Specify one or more interfaces, or a range of interfaces, that are within a specified group
on which the DHCP or DHCPv6 relay agent is enabled. You can repeat the
statement to specify multiple interfaces within a group, but you cannot
interface-name
specify the same interface in more than one group. Also, you cannot use an interface
that is being used by the DHCP local server. Use the statement at the
hierarchy levels to configure DHCPv6 support.
EX Series switches do not support DHCPv6.
group
group-name],
group
group-name],
...],
introduced in Junos OS Release 9.1.
hierarchy levels introduced in Junos OS Release 11.4.
dhcp-relay
...],
interface
[edit ... dhcpv6]
Copyright © 2017, Juniper Networks, Inc.