Juniper EX3400 Features Manual page 353

Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
server 192.0.2.2;
}
}
}
}
Starting in Junos OS Release 17.2R1, you can configure forwarding traffic to multiple
destination servers for a given port number by specifying multiple port configuration
statements with the same port number and different server addresses.
You cannot configure port helpers for standard ports used by services such as BOOTP,
DNS and TFTP; instead, use the
forwarding packets for those protocols.
The remaining statements are explained separately. See
port-number—UDP port number for listening.
Range: 1 through 65535
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring DNS and TFTP Packet Forwarding
Configuring Port-based LAN Broadcast Packet Forwarding on page 133
Configuring Routers, Switches, and Interfaces as DHCP and BOOTP Relay Agents
Chapter 13: Configuration Statements (Forwarding Options)
configuration statements specifically for
helpers
CLI Explorer
.
333