Configuring Dhcp Services On Ex4300 Switches (J-Web Procedure); Table 5: Dhcp Service Configuration Pages Summary For Ex4300 Switches - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Configuring DHCP Services on EX4300 Switches (J-Web Procedure)

Table 5: DHCP Service Configuration Pages Summary for EX4300 Switches

Field
DHCP Groups
Group Name
Interfaces
DHCP Pool Information
Pool Name
Link Pool
Network Address
10
On EX4300 switches, use the DHCP Configuration page to create DHCP pools and set
the DHCP parameters for them and to configure DHCP settings for existing DHCP pools
and static bindings.
To configure the DHCP services on EX4300 switches:
Select >
Configure Services
1.
Access a DHCP Configuration page:
2.
To configure a DHCP pool for a subnet, click
To configure DHCP groups, click
To globally configure settings for existing DHCP pools and static bindings, click
Configure Global DHCP Parameters
Enter information into the DHCP Service Configuration pages as described in
3.
Table 5 on page 10
To apply the configuration, click
4.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Function
Specifies the name of the group.
Family inet interface is listed , only if it is already
configured with family inet.
Specifies the name of an address-assignment
pool.
Specifies the pool name to which it is linked.
>
DHCP
Add in the DHCP Pools box.
in the DHCP Groups box.
Add
.
.
OK
Commit Options
Your Action
Enter the name of the group.
Select the interface for the specific group.
Type the pool name.
Select the option from the list.
Copyright © 2017, Juniper Networks, Inc.
> Commit . See Using