Request Dhcpv6 Server Reconfigure - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

request dhcpv6 server reconfigure

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
364
request dhcpv6 server reconfigure (all | address | client-id | interface interface-name |
logical-system logical-system-name | routing-instance routing-instance-name | session-id)
Command introduced in Junos OS Release 10.4.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
Initiate reconfiguration processing for the specified DHCPv6 clients if they are in the
bound state. If the clients are in the reconfiguring state, this command has no effect. If
the clients are in any state other than bound or reconfiguring, this command has the
same effect as the clear dhcpv6 server binding
When the local server state machine starts the reconfiguration process on a bound client,
the client transitions to the reconfigure state and the local server sends a reconfigure
message to the client. Because the client was in the bound state before entering the
reconfiguring state, all subscriber (or DHCP client) services, such as forwarding and
statistics, continue to work. An exponential back-off timer determines the interval at
which the reconfigure message is sent. If the final attempt is unsuccessful, the client is
returned to its original state by default. You can optionally include the
statement to configure the client to be cleared when reconfiguration fails.
all—Initiate reconfiguration for all DHCPv6 clients.
address—Initiate reconfiguration for DHCPv6 client with the specified IPv6 address.
client-id—Initiate reconfiguration for DHCPv6 client with the specified client ID.
interface interface-name—Initiate reconfiguration for all DHCPv6 clients on this logical
interface (clients whose initial login requests were received over the specified
interface).
logical-system logical-system-name—Initiate reconfiguration for all DHCPv6 clients on
the specified logical system.
routing-instance routing-instance-name—Initiate reconfiguration reconfigured for all
DHCPv6 clients in the specified routing instance.
session-id—Initiate reconfiguration for DHCPv6 client with the specified session ID.
view
Configuring Dynamic Client Reconfiguration of Extended Local Server Clients on page 114
request dhcpv6 server reconfigure on page 365
When you enter this command, you are provided feedback on the status of your request.
command.
clear-on-abort
Copyright © 2017, Juniper Networks, Inc.