Juniper EX3400 Features Manual page 390

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
request system reboot
request system reboot (at 2300)
request system reboot (in 2 Hours)
request system reboot (Immediately)
request system reboot (at 1:20 AM)
370
maintenance
clear system reboot
request system halt
Routing Matrix with a TX Matrix Plus Router Solutions Page
request vmhost reboot
request system reboot on page 370
request system reboot (at 2300) on page 370
request system reboot (in 2 Hours) on page 370
request system reboot (Immediately) on page 370
request system reboot (at 1:20 AM) on page 370
When you enter this command, you are provided feedback on the status of your request.
user@host> request system reboot
Reboot the system ? [yes,no] (no)
user@host> request system reboot at 2300 message ?Maintenance time!?
Reboot the system ? [yes,no] (no) yes
shutdown: [pid 186]
*** System shutdown message from root@test.example.net ***
System going down at 23:00
The following example, which assumes that the time is 5 PM (17:00), illustrates
three different ways to request the system to reboot in two hours:
user@host> request system reboot at +120
user@host> request system reboot in 120
user@host> request system reboot at 19:00
user@host> request system reboot at now
To reboot the system at 1:20 AM, enter the following command. Because 1:20 AM is
the next day, you must specify the absolute time.
user@host> request system reboot at 06060120
request system reboot at 120
Reboot the system at 120? [yes,no] (no) yes
Copyright © 2017, Juniper Networks, Inc.