Juniper EX3400 Features Manual page 415

Table 21: show dhcpv6 relay binding Output Fields (continued)
Field Name
State
Interface
Lease Expires
Lease Expires in
Preferred Lease Expires
Preferred Lease Expires in
Lease Start
Lease time violated
Incoming Client Interface
Server Address
Next Hop Server Facing Relay
Server Interface
Relay Address
Client Pool Name
Client ID Length
Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)
Field Description
State of the DHCPv6 relay address binding table on the
DHCPv6 client:
BOUND —Client has an active IP address lease.
—Initial state.
INIT
—Client is broadcasting a request to renew the
REBINDING
IP address lease.
—Client is broadcasting a request to
RECONFIGURE
reconfigure the IP address lease.
—Client is releasing the IP address lease.
RELEASE
—Client is sending a request to renew the IP
RENEWING
address lease.
—Client is requesting a DHCPv6 server.
REQUESTING
SELECTING —Client is receiving offers from DHCPv6 servers.
Incoming client interface.
Date and time at which the client's IP address lease expires.
Number of seconds in which the lease expires.
Date and UTC time at which the client's IPv6 prefix expires.
Number of seconds at which the client's IPv6 prefix expires.
Date and time at which the client's IP address lease started.
Lease time violation has occurred.
Client's incoming interface.
IP address of the DHCPv6 server.
Displays for a DHCPv6 relay agent in a multi-relay
unknown
topology that is not directly adjacent to the DHCPv6 server and
does not detect the IP address of the server. In that case, the
output instead displays the
Next Hop Server Facing Relay
Next-hop address in the direction of the DHCPv6 server.
Interface of the DHCPv6 server.
IP address of the relay.
Address pool that granted the client lease.
Length of client ID.
Level of
Output
brief detail
brief
detail
detail
detail
detail
detail
detail
detail
detail
field.
detail
detail
detail
detail
All levels
395