Comand - Mercedes-Benz S-Class Owner's Manual

Operating systems
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话18218750259
COMAND introduction
Back button
P68.20-3359-31
1 Back button
The back button L will take you up one
menu level.
Restarting COMAND
If errors occur when operating COMAND,
you can restart the system.
i
Only restart COMAND if it is absolutely nec-
essary. Data may otherwise be lost.
78
P82.86-4827-31
Illustration: system with single DVD drive
1 Eject button
Illustration: system with DVD changer*
1 Eject button
To restart COMAND: press button 1
for approximately ten seconds.
Nur fuer internen Gebrauch
Example of how to operate COMAND
The paths to the individual menu items are
always described starting from the main
function.
Example:
"Audio" "Audio" "Radio"
"Save station"
i
You will see the previously called up sub-
menu for each basic menu in the COMAND dis-
play.
If you can already see one of the submenus
on the screen (e.g. the "Audio"
"Radio" submenu), the first steps are
not required.
The following section describes the steps
for the example above.
To move to the top line: slide qm.
To select the "Audio" main function:
omp or turn ymz.
slide
"Radio"
"Audio"