Sending - Mercedes-Benz S-Class Owner's Manual

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话18218750259
Select the desired text module.
The text module is inserted into the
message text.
Storing the SMS message as a draft or
deleting it
i
You cannot store an SMS message as a draft
until you have entered the telephone number.
Select "Save as draft".
COMAND stores the message in the
SMS drafts folder.
or
Select "Back".
If one of the data fields contains new
data, a prompt will appear asking
whether you wish to store the message
as a draft.
Select "Yes" or "No".
The SMS message will either be stored
as a draft or deleted, depending on
your selection.
Sending an SMS message
i
This function is not possible with all mobile
phones.
Select "Send now" after you
have written the message.
Managing text modules
Creating a new text module
i
It is possible to create up to ten text mod-
ules. A template may comprise a maximum of
160 characters.
Select "Options"
when writing a new SMS message.
The input menu appears.
To enter data: proceed as described in
the "Entering the text of the message"
section ( page 140).
To store the text module: select
.
To cancel data entry: select "Back".
If data has already been entered, a
prompt will appear asking whether you
wish to store the text module.
Nur fuer internen Gebrauch
Select "Yes" or "No".
The text module will either be stored or
not, depending on your selection.
Changing an existing text module
Select
sage.
The list of text modules appears.
Select the desired text module
tions" "Change".
To change the text module: proceed
as described in the "Entering the text of
"New"
the message" section ( page 140).
To store the change: select
To cancel the change: select "Back".
If data has already been changed, a
prompt will appear asking whether you
wish to store the changes.
Select "Yes" or "No".
The text module will either be stored or
not, depending on your selection.
Operating systems
COMAND telephone*
when writing an SMS mes-
"Op-
.
141