Replacement And Adjustment; Opening And Closing The Machine - Ricoh Aficio 480W Dolphin-C2 Service Manual

28 April 2005

3. REPLACEMENT AND ADJUSTMENT

!
WARNING
• Before you attempt any procedure described in this section, always
switch off the main power switch on the machine and disconnect the
machine from the power source.
• Never turn off the main power switch when the power LED is lit or
flashing. To avoid damaging the hard disk or memory, press the
operation power switch on the operation panel to turn the power off, wait
for the power LED to go off, then turn the main power switch off.

3.1 OPENING AND CLOSING THE MACHINE

[B]
[C]
[A]: Operation panel release
Important: To close the operation panel, always press down evenly on both
sides.
[B]: Upper unit releases
Important: To avoid bending the catch and release mechanisms, always
release and raise the right and left sides together.
[C]: Hopper cover
[D]: Roll tray release
[E]: Paper exit cover
[F]: Paper exit guide plate
[A]
[D]
3-1
OPENING AND CLOSING THE MACHINE
B188R912.WMF
[F]
[E]
[B]