Fusing Lamps; Left End - Ricoh Aficio 480W Dolphin-C2 Service Manual

FUSING SECTION

3.8.8 FUSING LAMPS

[A]

Left end

[A]: Fusing lamp harness
! x 1)
[B]: Fusing lamp cover
(! x 1)
[C]: Left fusing lamp bracket
(! x 1)
Rotate the rubber
cushions until the cutout
faces down, then remove
the harnesses from the
bracket.
Right end
[D]: Open clamps x 4
[E]: Fusing lamp cover (! x 1)
[F]: Fusing lamp bracket (! x 1)
[G]: Turn the rubber cushion until the cutout faces down, then remove the
harnesses from the bracket.
[H]: Fusing lamps
NOTE: After the lamps are re-installed, make sure that the rubber cushions are
rotated so the slits are facing up to prevent the lamps from slipping out.
[B]
B188R510.WMF
[F]
[G]
3-46
[C]
[D]
[E]
#
"
[H]
28 April 2005
$
B188R511.WMF