28 April 2005
3.6.4 ROLL TRAY
!
CAUTION
The roll tray weighs 36 kg (80 lb.) At least two technicians are needed to
remove it and re-install lit.
Before removing the roll tray, prepare a clean flat surface to set the unit on after
removal. As the paper feed motor is mounted under the roll tray, a strong table, or
four blocks, to raise the roll tray slightly, is ideal and will make it easier to service.
• Right covers, rear covers (☛ 3.2.1)
[A]: Open the harness clamps ($ x6)
[B]: Connectors (" x 2)
[C]: PSU (☛ 3.9.1)
[D]: Left inner cover (! x 3)
[E]: Right inner cover (! x 2)
[F]: Harness clamp at the corner of the
right inner cover.
[A]
[D]
[F]
3-31
PAPER FEED
[B]
[C]
B188R947.WMF
[E]
B188R947.WMF