Interface Harness - Ricoh Aficio 480W Dolphin-C2 Service Manual

CASSETTE TRAY B759

Interface Harness

[A]
1. At the right rear corner, attach the large grommet [A].
2. Thread one end of the interface harness [B] through the hole.
NOTE: The white/gray connector pair [C] is at the front end of the cable.
3. Attach one large harness clamp [D] to the right frame inside the drawer, then
close the clamp around the cable.
4. At the rear, release the four harness clamps [E].
5. Attach the long harness clamps [F].
6. Connect the harness [G] (" x2).
7. Put the cable on the harness clamps, and close the clamps around the cable
(# x6).
[B]
[D]
B759I008.WMF
[F]
[C]
[E]
"
!
1-36
28 April 2005
$
#
B759I009.WMF
[G]