Sp4000 Scanner - Ricoh Aficio 480W Dolphin-C2 Service Manual

28 April 2005

SP4000 Scanner

4008 Scanner Sub Scan
Magnification
4010 Scanner Sub Scan Registration
001 Leading Edge
002 Trailing Edge
4011 Scanner Main Scan
Registration
4012 Scanner Erase Margin
005 DF: Leading Edge
006 DF: Trailing Edge
007 DF: Left
008 DF: Right
4013 Scanner Free Run
001 Start
002 Page Interval Setting
003 Original Length Setting
SP (SERVICE PROGRAM) MODE TABLES
Adjusts the magnification by changing the scanning
speed.
[-0.9~+0.9/0.1 %]
Fine adjusts the time between the sensor-on position
and the leading edge of the image.
[-10~+10/0.1 mm]
Fine adjusts the time between the sensor-off position
and the trailing edge of the image. This determines
the timing for the CIS to stop reading the image after
the original has passed the registration sensor.
[-10~+10/0.1 mm]
Adjusts the scan registration.
[-4~+4/0.1 mm]
Adjusts the non-scanning area.
[0.0~+9.0/0.1 mm]
To start the free run, touch [On].
To end the free run, touch [Off].
The free run simulates scanning pages of length
determined by SP4013 003, with the interval between
each page determined by SP4013 002.
Adjusts the scanner free run (see the description for
4013 001).
[0~25/0.1 s]
Adjusts the scanner free run (the description for 4013
001).
[0.1~15/0.1 m]
5-53