28 April 2005
ROLL FEEDER (B758)
[A]
[E]
[F]
B758I108.WMF
[B]
[C]
[D]
B758I109.WMF
15. Loosen the three screws that secure the drawer connector [A].
16. Remove the shipping material from the flat cable [B].
17. Install the roll feeder [C] on the slide rails, and fit it over the positioning pins [D].
18. Use the four screws [E] (! x2 ea. M4 x 6) to attach the tray to the side rails [F].
1-27