Jam Code Table; Printer Unit; Scanner Unit - Ricoh Aficio 480W Dolphin-C2 Service Manual

28 April 2005

4.2 JAM CODE TABLE

Printer Unit

Code Jam Detection Condition
1 At power on
3 Paper did not reach roll lead edge sensor 1.
4 Paper did not reach roll lead edge sensor 2.
5 Paper did not reach roll lead edge sensor 3.
Paper did not reach leading edge sensor 4, or
6
paper feed sensor 1 (cassette)
8 Paper did not reach cutting sensor 1.
9 Paper did not reach cutting sensor 2.
10 Paper did not reach paper feed sensor 2 (cassette
13 Paper did not reach registration sensor.
14 Paper did not reach exit sensor.
16 Paper did not reach upper exit sensor.
34 Paper did not reach by-pass feed sensor.
53 Paper stayed at roll lead edge sensor 1.
54 Paper stayed at roll lead edge sensor 2.
55 Paper stayed at roll lead edge sensor 3.
Paper stayed at roll lead edge sensor 4, or paper
56
feed sensor 1 (cassette).
58 Paper stayed at cutting sensor 1.
59 Paper stayed at cutting sensor 2.
60 Paper stayed at paper feed sensor 2 (cassette).
63 Paper stayed at registration sensor.
64 Paper stayed at exit sensor.
66 Paper stayed at upper exit sensor.
*1
A1,A2, B, C and P refer to the area of the jam in the illustration that is displayed on the touch panel when
an error occurs.

Scanner Unit

Code Jam Detection Condition
1 At power on.
Original does not reach the registration
2
sensor.
Original registration sensor does not
3
switch off.
4 Original stays at the registration sensor.
Original stays in scanner unit, but does not
5
reach the registration sensor.
6 Scanner stop switch is pressed
Original does not reach the original exit
7
sensor.
*1
A1,A2, B, C and P refer to the area of the jam in the illustration that is displayed on the touch panel when
an error occurs.
Location*
Not specified
A2
A2
A1
A1
A2
A1
A1
B
C
C
A3
A2
A2
A1
A2
A1
B
C
C
1
Location*
P
P
P
P
P
P
P
4-19
JAM CODE TABLE
1
Remarks
These are jams
when paper does
not activate the
sensor.
These are jams
when paper stays
at the sensor.
Remarks