Ricoh Aficio 480W Dolphin-C2 Service Manual page 260

Table of Contents

Advertisement

28 April 2005
5856
Remote ROM Update DFU
When set to "1" allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on. Allows the technician to upgrade the firmware using a parallel
cable
0: Not allowed
1: Allowed
5857
Save Debug Log
001
On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until
this feature is switched on.
0: OFF
1: ON
002
Target (2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
2: HDD
3: SD Card
005
Save to HDD
Specifies the decimal key number of the log to be written to the hard disk.
006
Save to SD Card
Specifies the decimal key number of the log to be written to the SD Card.
009
Copy HDD to SD Card (Latest 4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
010
Copy HDD to SD Card Latest 4 MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it
to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card. This SP does not execute if there is no
log on the HDD with no key specified.
011
Erase HDD Debug Data
Erases all debug logs on the HDD
012
Erase SD Card Debug Data
Erases all debug logs on the SD Card. If the card contains only debugging
files generated by an event specified by SP5858, the files are erased when
SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
013
Free Space on SD Card
Displays the amount of space available on the SD card.
SP (SERVICE PROGRAM) MODE TABLES
5-83

Advertisement

Table of Contents
loading

Table of Contents