MFP OPTIONS
7. Do SP5045 002 (Accounting Counter) and select the counter type to set the
units for the electrical counter.
NOTE: Nine selections are available for this SP, but you must select either "7"
(meters) or "8" (yards).
8. Do SP5120 (Mode Clear Option Counter Removal)
This SP determines what happens to the copy job settings (magnification,
density, etc.) when the Key Counter is removed or the paper supply runs
during a print job.
0:
Yes (default):
1:
Stand-by:
2:
No:
Job settings and job are cleared
Job settings are cleared after the job is completed
Job settings remain even after job is completed
1-54
28 April 2005