Exposure Glass - Ricoh Aficio 480W Dolphin-C2 Service Manual

SCANNER

3.3.8 EXPOSURE GLASS

• Upper original transport unit (☛3.3.4)
[A]: Mark the position of the screws.
• Before removing the fixing plate screws, you need to draw circles around the
screw heads to guide you when you reinsert the screw heads.
[B]: Bracket (! x2)
[C]: Exposure glass
Important
• The CIS unit is assembled in a dust-free environment.
• When replacing the CIS unit, prevent dust particles from entering the unit.
• To avoid prevent leaving fingerprints on the exposure glass, never touch it.
• Place the exposure glass carefully inside the CIS guide groove. Make sure that
the glass does not scrape against the groove. Scraping the glass could create
glass shavings that will get inside the CIS unit and cause image problems.
[C]
3-14
28 April 2005
[A]
[B]
B188R930.WMF