Ricoh Aficio 480W Dolphin-C2 Service Manual page 254

28 April 2005
011 Logout
Handles the login request of the login initiator for SBP-2. (1-bit)
Bit0: Off
Bit1: On
OFF: Disable (refuse login). Initiator retry during login. Login refusal on
ON: Enable (force logout). Initiator retry during login. Login refusal on
012 Login
Enables or disables the exclusive login feature (SBP-2 related).
Bit0: Off
Bit1: On
OFF: Disables. The exclusive login (LOGIN ORB xclusive it) is ignored.
ON: Enables. Exclusive login is in effect.
013 Login MAX
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
5840 IEEE 802.11b
006 Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This
bandwidth setting varies for different countries.
NA/CHN: [1~11/1]
EU: [1~13/1]
007 Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN.
This bandwidth setting varies for different countries.
NA/CHN: [1~11/1]
EU: [1~13/1]
011 WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
00: If the initiator receives another login request while logging in, the
request is refused.
01: If the initiator receives another login request while logging in, the
request is refused and the initiator logs out.
10: Not used
11: Not used
Note: Displayed only when the wireless LAN card is installed.
5841 Supply Name Setting
This SP allows you to enter the names of the supplies that will appear when you
push [User Tools] and then touch "Inquiry" on the operation panel display. After
you open this SP, touch the "Soft Key Board" button then use the keyboard to
enter the names of the supplies.
arrival of login request (standard operation)
arrival of login request, and the initiator forces the login.
SP (SERVICE PROGRAM) MODE TABLES
5-77