SP (SERVICE PROGRAM) MODE TABLES
5113
Optional Counter Type
This SP is used for the key counter only.
001
Default Optional Counter Type
Selects the type of counter:
0: None
1: Key card (RK3, 4) Japan only
2: Key card down Japan only
3: Pre-paid card Japan only
4: Coin Lock Japan only
5: MF key card Japan only
11: Exp Key Card (Add) (used key counter connector)
12: Exp Key Card (Deduct) (used key counter connector)
002
External Optional Counter Type
Enables the SDK application. This lets you select a number for the
external device for user access control.
Note: "SDK" refers to software on an SD card.
[0~3/1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
5118
Disable Copying
Temporarily denies access to the machine.
0: Release for normal operation
1: Prohibit access to machine
5120
Mode Clear Opt. Counter Removal
Do not change.
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121
Counter Up Timing
Determines whether the optional counter counts up at paper feed-in or at paper
exit.
0: Feed count
1: No feed count
5127
APS OFF Mode
This SP can be used to switch APS (Auto Paper Select) off when a coin lock or
pre-paid key card device is connected to the machine.
0: On
1: Off
5-66
28 April 2005