Ricoh Aficio 480W Dolphin-C2 Service Manual page 244

28 April 2005
5150 Bypass Length Setting DFU
Determines whether long paper can be fed from the bypass tray. Normally, only
paper up to 600 ms can be fed from the bypass tray. With this SP switched on,
however, the bypass tray can feed paper up to 1260 mm long. However, this may
not be possible if the printer driver does not allow printing on paper longer than
432 mm.
0: Off. Length limited to 600 mm
1: On. Length up to 1260 mm possible
5162 App. Switch Method
Controls if the application screen is changed with a hardware switch or a software
switch.
0: Soft Key Set
1: Hard Key Set
5169 CE Login
To change the printer bit switches, you must log into service mode with this SP
before you go into the printer SP mode.
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5180 Charge Count Method Japan Only
5212 Page Numbering DFU
Do the page numbering settings with the User Tools menus.
5302 Set Time DFU
Sets the time clock for the local time. This setting is done at the factory before
delivery. The setting is GMT expressed in minutes.
[–1440~1440/1 min.]
JA: +540 (Tokyo)
NA: -300 (NY)
EU: +60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
SP (SERVICE PROGRAM) MODE TABLES
5-67