Ricoh Aficio 480W Dolphin-C2 Service Manual page 169

28 April 2005
SC925 B Net File function error
The NetFile file management on the HDD cannot be
used, or a NetFile management file is corrupted and
operation cannot continue. The HDDs are defective
and they cannot be debugged or partitioned, so the
Scan Router functions (delivery of received faxes,
document capture, etc.), Web services, and other
network functions cannot be used.
HDD status codes are displayed below the SC code:
SC954 D Printer Image Setting Error
The IPU did not issue the signal
required to start image
processing for the printing mode
within 60 s after the paper stops
for registration.
SC955 D Memory Setting Error
Settings required for memory to
start image processing are not
sent from the IPU within 60 s
after the paper stops for paper
stops for registration.
SC964 D Scanner start signal error 1
The scanner receives another
start signal after scanning has
already started.
SC965 D Print start signal error 2
The printer received another
print start signal after print job
has already started.
SC967 D Print start signal error 3
The printer received another
print start signal after print job
has already started.
SERVICE CALL CONDITIONS
• Software defective
• Replace the software (all firmware
modules).
• IPU defective
• Software defective. Replace the
software (all firmware modules).
• IPU defective
• Software defective.
• Replace the software (all firmware
modules).
• Software defective.
• Replace the software (all firmware
modules).
• Software defective.
• Replace the software (all firmware
modules).
• BCU defective
4-17
• Refer to the four
procedures below
(Recovery from
SC925).