Installation Procedure; Installing The Roll Feeder - Ricoh Aficio 480W Dolphin-C2 Service Manual

28 April 2005

1.3.2 INSTALLATION PROCEDURE

Installing the Roll Feeder

[A]
[H]
[E]
!
CAUTION
1. Unplug the main machine power cord before starting the following
procedure.
2. Before starting the installation, insert the leveling shoes under the
leveling feet, and level the machine.
The machine is very heavy. To avoid serious injury, make sure that you
3.
have a sufficient number of people to assist, and use proper lifting
equipment for lifting or moving.
The feed tray is weighs 32 kg (70.5 lb.) and requires at least two people
4.
to lift and install.
NOTE: Keep the shipping retainers after installing the machine. They will be
reused if the machine is moved to another location in the future.
1. Turn off the copier main switch.
2. Remove these covers:
[A]: Right lower cover (! x4)
[B]: Right rear cover (! x6)
[C]: Left front cover (! x4)
[D]: Left rear cover (! x6)
[E]: Rear covers (! x10)
3. Remove the lower cover [F] and two brackets [G] (! x2 ea.)
4. Remove the toner collection bottle [H].
[D]
[C]
[B]
B188I501.WMF
[G]
[E]
[F]
1-23
ROLL FEEDER (B758)
[G]
B758I100.WMF