Ricoh Aficio 480W Dolphin-C2 Service Manual page 245

SP (SERVICE PROGRAM) MODE TABLES
5307 Summer Time
Lets you set the machine to adjust its date and time automatically with the change
to Daylight Savings time in the spring and back to normal time in the fall. This SP
lets you set these items:
Day and time to go forward automatically in April.
-
Day and time to go back automatically in October.
-
Set the length of time to go forward and back automatically.
-
The settings for 002 and 003 are done with 8-digit numbers:
Digits
1st, 2nd
3rd
4th
5th, 6th
7th
8th
001 Setting
003 Rule Set (Start)
004 Rule Set (End)
5401 Access Control
This SP stores the settings that limit uses access to SDK (Software Development
Kit) application data.
200 SDK1 Unique ID
201 SDK1 Recognition
210 SDK2 Unique ID
211 SDK2 Recognition
220 SDK3 Unique ID
221 SDK3 Recognition
5404 User Code Count Clear
001 User Code Counter Clear
Meaning
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes a
seven-digit setting)
Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd digit. If "0" is
selected for "Sunday", for example, and the selected Sunday is the
start of the 2nd week, then input a "2" for this digit.
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example), digit
8 should be 3 (30 minutes).
Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
This data can be converted from SAS
(VAS) when installed or uninstalled.
Clears all user code counters.
Press [#] to execute.
5-68
28 April 2005