Ricoh Aficio 480W Dolphin-C2 Service Manual page 250

28 April 2005
5828 Network Setting
050 1284 Compatibility
(Centro)
052 ECP (Centro)
065 Job Spool Setting
066 Job Spool Clear:
Start Time
069 Job Spool
(Protocol)
084 Print Settings List
090 TELNET (0:OFF
1:ON)
091 Web (0:OFF 1:ON)
5831 Initial Settings Clear DFU
This SP code clears all initial settings with the exception of the time setting and
user code settings, and returns them to the factory defaults.
Note: This function can also be done with the User Tools.
SP (SERVICE PROGRAM) MODE TABLES
Enables and disables bi-directional communication
on the parallel connection between the machine and
a computer.
0: Off
1: On
Disables and enables the ECP feature (1284 Mode)
for data transfer.
0: Disabled
1: Enabled
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
This SP determines whether the job interrupted at
power off is resumed at the next power on. This SP
operates only when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
This SP detemines whether job spooling is enabled
or dispabled for each protocol. This is a 8-bit setting.
0 LPR
1 FTP (Not Used)
2 IPP
3 SMB
Prints a list of the NCS parameter settings.
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
0: Disable
1: Enable
Disables or enables the Web operation.
0: Disable
1: Enable
5-73
4 BMLinks (Japan Only)
5 DIPRINT
6 Reserved (Not Used)
7 Reserved (Not Used)