How To Install The Pump And Bell Housing Assembly - Genie S-65 Service And Repair Manual
Hide thumbs
Also See for S-65:
- Service manual (344 pages) ,
- Operator's manual (61 pages) ,
- Maintenance manual (182 pages)
Table of Contents
Advertisement
Service and Repair Manual
Engines
How to Ins tall the Pum p and Bell Housi ng As sem bly
How to Install the Pump and Bell
Housing Assembly
1
Install the pump and bell housing assembly.
Deutz models: Torque the bell housing
mounting bolts labeled "C" in sequence to
28 ft-lbs / 38 Nm. Then torque the bell housing
mounting bolts labeled "C" in sequence to
40 ft-lbs / 54 Nm.
Ford models: Torque the bell housing
mounting bolts labeled "A" and "B" in
sequence to 28 ft-lbs / 38 Nm and the
mounting bolts labeled "C" to 49 ft-lbs / 66 Nm.
Then torque the bell housing mounting bolts
labeled "A" and "B" in sequence to 40 ft-lbs /
54 Nm and the mounting bolts labeled "C" to
70 ft-lbs / 95 Nm.
Perkins models: Torque the bell housing
mounting bolts labeled "B" in sequence to
28 ft-lbs / 38 Nm and the mounting bolts
labeled "A" to 49 ft-lbs / 66 Nm. Then torque
the bell housing mounting bolts labeled "B" in
sequence to 40 ft-lbs / 54 Nm and the
mounting bolts labeled "A" to 70 ft-lbs / 95 Nm.
Component damage hazard.
Type "A" flexplate: When
installing the pump, do not force
the pump coupler into the
flexplate or damage to the pump
shaft seal may occur.
Component damage hazard. Do
not force the drive pump during
installation or the flex plate teeth
may become damaged.
62
S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC Part No. 1268492
September 2016
Ford Models
Deutz Models
Advertisement
Table of Contents
