Traction Manifold Components, 4Wd - Genie S-65 Service And Repair Manual

Service and Repair Manual
Manifolds
7-11 Traction M anifol d C omponents , 4WD
7-11

Traction Manifold Components, 4WD

The traction manifold is mounted inside the drive chassis at the non-steer end.
Index
Description
No.
1 Flow divider/combiner valve
2 Relief valve, 280 psi / 19.3 bar
3 Check valve
4 Flow divider/combiner valve
5 Orifice, 0.040 inch / 1 mm
6 Orifice, 0.040 inch / 1 mm
7 Orifice, 0.040 inch / 1 mm
8 Check valve
9 Check valve
10 Check valve
11 Check valve
12 Shuttle valve, 3 position 3 way
13 Flow divider/combiner valve
14 Check valve
86 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC Part No. 1268492
Schematic
Function
Item
XX Controls flow to non-steer end drive motors
in forward and reverse
UU Charge pressure circuit
TT Steer end drive motor circuit
AB Controls flow to flow divider/combiner
valves 1 and 13
WW Equalizes pressure on both sides of flow
divider/combiner valve 1
AE Equalizes pressure on both sides of flow
divider/combiner valve 13
AC Equalizes pressure on both sides of flow
divider/combiner valve 4
SS Non-steer end drive motor circuit
AF Non-steer end drive motor circuit
ZZ Steer end drive motor circuit
AG Steer end drive motor circuit
VV Charge pressure circuit that directs hot oil
out of low pressure side of drive pump
AD Controls flow to steer end drive motors in
forward and reverse
YY Non-steer end drive motor circuit
September 2016
Torque
80-90 ft-lbs /
108-122 Nm
35-40 ft-lbs / 14-16
Nm
35-40 ft-lbs / 14-16
Nm
80-90 ft-lbs /
108-122 Nm
35-40 ft-lbs / 14-16
Nm
60-70 ft-lbs / 81-95
Nm
35-40 ft-lbs / 14-16
Nm
60-70 ft-lbs / 81-95
Nm
80-90 ft-lbs /
108-122 Nm
80-90 ft-lbs /
108-122 Nm
35-40 ft-lbs / 14-16
Nm