Genie S-65 Service And Repair Manual page 123

Service and Repair Manual
Control System Fault Codes
Error Source Error Type
ID Name ID
54 Drive Brake Valve 21
55 High Drive Motor 21
Speed Valve
56 Platform Level 21
Value
57 Foot switch/ECU 12
Power
Crosscheck
15
61 Steer Joystick 11
12
15
16
17
62 Steer Directional 21
Valve
106 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC Part No. 1268492
Condition
Name
Fault Drive frozen at zero and neutral.
Alarm sounds indicating a fault.
Fault Motor speed in the low state.
Alarm sounds indicating a fault.
Fault Direction frozen at zero and
neutral, AB
Value too high Direction frozen at zero and
neutral, AB
Value too low
Value at 5V Limited speed and direction.
Frozen at zero and neutral. Alarm
sounds indicating a fault.
Value too high
Value too low
Value at 0V
Not calibrated
Fault Limited speed and direction.
Frozen at zero and neutral. Alarm
sounds indicating a fault.
September 2016
Solution
Cycle power off, then on after
problem has been corrected.
Cycle power off, then on after
problem has been corrected.
Power up controller with
problem corrected
Power up controller with
problem corrected
Cycle power off, then on after
problem has been corrected.
Calibrate joystick.
Cycle power off, then on after
problem has been corrected.