Deutz D 2.9 L4 Engine Specifications - Genie S-65 Service And Repair Manual

September 2016
Deutz D 2.9 L4 Engine Specific ati ons
Deutz D 2.9 L4 Engine
Displacement
Number of cylinders
Bore and Stroke
Horsepower
Firing order
Low idle
High idle
Compression ratio
Compression pressure
Governor
Lubrication system
Oil pressure (@ 2000 rpm)
Oil capacity
(including filter)
Part No. 1268492 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC
Oil viscosity requirements
-22° F to 86° F/ -30° C to 30° C
177 cu in
-4° F to 90° F / -20° C to 32° C
2.9 liters
Above 23° F / -5° C
4
Unit ships with 15W-40. Extreme operating
3.6 x 4.3 inches
temperatures may require the use of alternative engine
92 x 110 mm
oils. For oil requirements, refer to the Engine Operator
48.8 @ 2600 rpm
Manual for your engine.
37 kW @ 2600 rpm
Oil temperature switch
1 - 3 - 4 - 2
Temperature switch point
1500 rpm
313 Hz
Oil Pressure switch
2500 rpm
Oil pressure switch point
521.7 Hz
18.4:1
Engine coolant
362 to 435 psi
Capacity
25 to 30 bar
electronic
Fuel injection system
Injection pump make
40 to 60 psi
Injection pump pressure,
1.4 to 3 bar
maximum
9.4 quarts
Injector opening pressure
9 liters
Fuel requirement
For fuel requirements, refer to the engine Operator
Manual for your engine.
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice or obligation.
Service and Repair Manual
Specifications
5W-30 (synthetic)
10W-40
20W-50
257°F
125°C
20 psi
1.4 bar
10 quarts
9.4 liters
Bosch
15000 psi
1034 bar
3046 psi
210 bar
11