How To Install A Type "B" Flex Plate - Genie S-65 Service And Repair Manual

September 2016
How to Ins tall a T ype " B" Flex Plate
How to Install a Type "B" Flex
Plate
1 Install the flex plate onto the engine flywheel
with the rubber vibration isolators towards the
pump.
2 Apply Loctite® removable thread sealant to
the flex plate fasteners and loosely install the
fasteners.
3 Deutz models: Torque the flex plate mounting
bolts in sequence to 28 ft-lbs / 38 Nm. Then
torque the flex plate mounting bolts in
sequence to 40 ft-lbs / 54 Nm.
Ford and Perkins models: Torque the flex
plate mounting bolts in sequence to 14 ft-lbs /
19 Nm. Then torque the flex plate mounting
bolts in sequence to 20 ft-lbs / 27 Nm.
4 Apply a high viscosity coupling grease (Genie
part number 128025) to the splines of the
pump shaft and flex plate.
Grease Specification
Shell Alvania® Grease CG, NLGI 0/1 or equivalent.
Part No. 1268492 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC
Service and Repair Manual
Engines
Ford Models
Deutz Models
Perkins Models
61