Genie S-65 Service And Repair Manual page 122

September 2016
Error Source Error Type
ID Name ID
45 Platform Level 21
Switch
46 Primary 21
Extend/Retract
Switch
51 Drive Joystick 11
12
15
16
17
53 Drive Flow Valve 12
(EDC)
15
17
Part No. 1268492 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC
Condition
Name
Fault Platform level frozen at neutral
Fault Platform Ext/Ret frozen at neutral Power up controller with
Value at 5V Limited speed and direction.
Frozen at zero and neutral. Alarm
sounds indicating a fault.
Value too high
Value too low
Value at 0V
Not calibrated
Value too high Limited speed and direction.
Frozen at zero and neutral. ALarm
sounds indicating a fault.
Value too low
Not calibrated Normal function except threshold
for one or both directions is zero.
Control System Fault Codes
Service and Repair Manual
Solution
Power up controller with
problem corrected
problem corrected
Cycle power off, then on after
problem has been corrected.
Calibrate joystick.
Cycle power off, then on after
problem has been corrected.
Calibrate valve threshold.
105